Linksys router red light is one of the most popular issues faced by Linksys users. Although a majority of Linksys users are happy with their routers, there are situations where some issues tend to show up. One such example is the red light on Linksys router. If you see the router red light flashing every now and again, then the problem is with the internet connection.
Since we can’t lose a single second being offline, it is completely understandable why we need to fix this issue as soon as possible. Before starting with the troubleshooting steps, let’s learn more about the issue first.
Why does my Linksys router have a red light?
The LED light on your Linksys router indicated the current status of your network. So when you see the red light on Linksys router, it indicates that there is no internet connection. If you see the Linksys router red light flashing, it indicates that the router has problems communicating with the modem.
In this post, we have put down a few tested solutions that you can try to fix the red light on Linksys router. So let’s start with the post!
How to fix the Linksys router Flashing red issue?
In this section, you will find a few tested solutions to make sure the red light on Linksys router goes off. These steps are quite easy to follow and you can follow them one by one until the issue gets wiped off. Follow the steps below:
1. Check the cables
- Firstly, make sure the wires and cables are firmly plugged into their respective ports.
- You should hear a click when you plug the ethernet cable into the ports.
- If you don’t hear a click sound, the cables won’t be firmly plugged in.
- So you would unknowingly trigger the Linksys red light issue while cleaning or moving the devices.
- If the red light does not go off, go to the next step.
2. Reboot your devices
- Rebooting your modem and router is another way to fix the Linksys router red light flashing issue.
- Firstly, reboot your modem.
- Unplug the power cable of your modem from the power outlet.
- Wait for a few minutes before you plug it back into the outlet.
- Do the same thing with the router as well.
- If the red light on Linksys router does not go off, kindly reset the router.
3. Reset the router to the factory defaults
- The last step to fix the router red light flashing issue is the router reset process.
- Press and hold the reset button on the Linksys router.
- Hold down the router reset button for at least 10 seconds.
- The router will restore its factory default settings. Now time to reconfigure!
4. Reconfigure router to fix Linksys flashing red
- Connect to your Linksys router.
- Login to the router via the myrouter.local web address. In the case of a Smart WiFi router, use the linksyssmartwifi.com web address.
- Go to the Linksys router setup wizard and follow the on-screen instructions to set up your device.
Now that you have reconfigured your router after the reset process, the red light issue will be completely wiped off.
Bonus tip – You should also contact your ISP (internet service provider) and cross-check whether the issue is at their end. Sometimes, there may be internet downtime on your router due to ongoing maintenance work at your service provider’s server. In that case, you just have to wait for a few minutes or hours.
Conclusion
The Linksys router red light issue is one of the most common issues or errors encountered by Linksys users. The red light on the router does not necessarily mean that your router has manufacturing defects. In most cases, it is the internet or modem issue that invokes the router red light flashing issue.
This post was all about the Linksys red light issue and the troubleshooting steps to fix the issue. We hope this post helped you fix the red flash on Linksys router. If you see any other issues or errors showing up on your device, kindly get in touch with our support team for any help.